Impact Air Mesh C3 Gloves

Glove Safety Features

Abrasion Resistant

Abrasion Resistant 4

Abrasion Resistance is measured on a 1-4 scale (4 being most abrasion resistant). It is measure during the EN:388 test by rotating a flat surface against the material until the material is punctured.

Anti Microbial

Anti Microbial

Anti Microbial keeps gloves from smelling bad. 212 makes several of their products with antimicrobial materials to avoid bacterial buildup and unpleasant smells and rashes.

Cut Resistance

Cut Level 3

Cut Resistance is the most talked about attribute when it comes to hand safety. Gloves are measured on a 1-5 scale (5 being most cut resistant) by EN standards and a 1-9 scale (9 being the most cut resistant) by ANSI/ISEA standards. For more info on cut resistance, see page 9 of the catalog.


Dexterity Level 3

Dexterity is the tactile sensitivity (or exibility) of a glove. In general, the thinner the glove, the more dexterity it has and the easier small objects are handled. The test that is most known for scoring dexterity is EN:420, which measure by the smallest size object that can be picked off of a flat surface. The smaller the object, the higher the rating on a 1-4 scale.

Impact Resistance

Impact Resistant

Impact Resistance is another popular and sometimes much needed attribute to hand protection. There are different impact standards that vary from industry to industry. If you need help identifying which type of impact level you need, contact the 212 experts to help you find the perfect form of protection.

Grip Level

Grip Level 3

Grip Level is conducted in house using a measured grip pressure and adding weight to the object being held. The more weight that can be held at the consistent pressure, the higher the rating of grip strength. We rate grip test on a 1-5 scale (5 having the most grip).

Puncture Resistance

Puncture Resistant 1

Puncture Resistance is tested under the EN:388 standards and based on a 1-4 scale (4 being the most puncture resistant). The test measures the pressure it takes to push a 1mm tipped steel rod through a material.

Tear Level

Tear Level 2

Tear Level is another metric of the EN:388 testing method and is measured by testing the tinsel strength of the main material of a glove. It is tested by hanging the glove and adding weight to the free end of the glove until the material threading ruptures.

Out of stock

Cut resistance, abrasion resistance, impact resistance and breathability all in one glove? It's now possible with the 212 AIRMESH IMPACT C3. This breathable, dexterous glove provides the protection you need when the heat is on and the job is tough. Made GSA Compliant and designed and developed in the USA, this glove is perfect not only for your job but for America's finest. OOHRAH!


    • Heavy-Duty, Flexible Impact Knuckle Protection
    • EN Cut Level 3 Resistance
    • Air Mesh Back of Hand
    • Reinforced Palm and Fingers
    • Namar™ 4k Abrasion Resistant Palm
    • Full Fingertip Pinch Point Coverage

    WARNING! This product will melt when exposed to extreme heat or open flames, posing a risk of serious injury where melted product comes into contact with skin!

    Weight 0.20 lbs
    Sizes S, M, L, XL, XXL, XXXL
    Colors Coyote
    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account