AX360 Seamless Impact Cut 5 Gloves

Glove Safety Features

Abrasion Resistant

Abrasion Resistant 4

Abrasion Resistance is measured on a 1-4 scale (4 being most abrasion resistant). It is measure during the EN:388 test by rotating a flat surface against the material until the material is punctured.

Cut Resistance

Cut Level 5

Cut Resistance is the most talked about attribute when it comes to hand safety. Gloves are measured on a 1-5 scale (5 being most cut resistant) by EN standards and a 1-9 scale (9 being the most cut resistant) by ANSI/ISEA standards. For more info on cut resistance, see page 9 of the catalog.

Dexterity

Dexterity Level 3

Dexterity is the tactile sensitivity (or exibility) of a glove. In general, the thinner the glove, the more dexterity it has and the easier small objects are handled. The test that is most known for scoring dexterity is EN:420, which measure by the smallest size object that can be picked off of a flat surface. The smaller the object, the higher the rating on a 1-4 scale.

Impact Resistance

Impact Resistant

Impact Resistance is another popular and sometimes much needed attribute to hand protection. There are different impact standards that vary from industry to industry. If you need help identifying which type of impact level you need, contact the 212 experts to help you find the perfect form of protection.

Puncture Resistance

Puncture Resistant 4

Puncture Resistance is tested under the EN:388 standards and based on a 1-4 scale (4 being the most puncture resistant). The test measures the pressure it takes to push a 1mm tipped steel rod through a material.

Tear Level

Tear Level 4

Tear Level is another metric of the EN:388 testing method and is measured by testing the tinsel strength of the main material of a glove. It is tested by hanging the glove and adding weight to the free end of the glove until the material threading ruptures.

Out of stock
SKU
AXIMPC5-06

Blades a little sharper than you were expecting? Call in the cut 5. The AX360 IMPACT C5 is the ultimate cut protection glove. Offering extreme dexterity, cooling HPPE material, a foam nitrile grip and TPR back of hand protection, this glove can handle almost anything!

FEATURES

  • Heavy-Duty, Flexible Impact Knuckle Protection
  • EN Cut Level 5 Resistance
  • Foam Nitrile Palm for Enhanced Grip in Wet/Dry Conditions
  • HPPE Shell is Breathable and Keeps Hands Cool
  • Elastic Cuff Keeps Dirt and Debris out of Glove
  • Semi-Porous Palm to Channel Liquids
  • ANSI A3 Cut Resistance

WARNING! This product will melt when exposed to extreme heat or open flames, posing a risk of serious injury where melted product comes into contact with skin!

Weight 1 lbs
Sizes S, M, L, XL, XXL
Colors Gray
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Toughness

9

Comfortability

7

Feel

7

Breathability

No