AX360 Seamless Knit Dotted Grip Cut 3 Gloves

$15.00

AX360 Seamless Knit Dotted Grip Cut 3 Gloves

In stock
SKU AXDGC3-03
Weight 1 lbs
Sizes S, M, L, XL, XXL
Colors Blue

Palm width in inches

Download Hand Sizing Guide

Small Size is
2 5/8" - 3 1/8"

Medium Size is
3 1/8" - 3 1/2"

Large Size is
3 1/2" - 3 15/16"

XL Size is
3 15/16" - 4 7/16""

2XL Size is
4 7/16" - 4 13/16"

3XL Size is
4 13/16" +

Glove Safety Features

Cut Resistance

Cut Level 3

Cut Resistance is the most talked about attribute when it comes to hand safety. Gloves are measured on a 1-5 scale (5 being most cut resistant) by EN 388:2016 standards and a A1-A9 scale (9 being the most cut resistant) by ANSI/ISEA 105-2016 standards. The EN 388 rating may also include the results of the TDM-100 cut test, which are measured on an A-I scale (I being the most cut resistant). For more information on cut resistance, check out our cut resistance blog.

Dexterity

Dexterity Level 4

Dexterity is the tactile sensitivity (or flexibility) of a glove. In general, the thinner the glove, the more dexterity it has and the easier it will be to handle small objects. The test we use to determine 212 Performance glove dexterity is EN 420:2009. This test measures the smallest stainless steel pin that can be picked up. The smaller the object, the higher the rating on a 1-5 scale.

Puncture Resistance

Puncture Resistant 4

Glove puncture resistance is tested using the ANSI 105:2011 and EN 388:2016 standard, part of the mechanical risk tests. A blunt probe is pushed through the glove material until failure. For the EN 388, the ratings are based on a 1-4 scale (4 being the most puncture resistant), and for the ANSI 105, the ratings are based on a 0.

Tear Level

Tear Level 4

Tear resistance is the measurement of textile tinsel strength of the main material of a glove. EN388:2016 and ASTM D2261 are the two most frequently used tests to measure tear strength. They are both measured by clamping the material to two jaws and increasing the force separating the jaws until the material breaks. EN388:2016 is measured on a 1-4 scale (4 being the most tear resistant). ASTM D2261 is measured simply by reporting the force of the tear.

Faster, lighter, more grip and cut level 3 protection are just some of the advantages of our new AX360 Dotted Grip Cut 3. Our new temperature controlled HPPE chassis combines lightweight durability with sturdy cut resistance, top that with NFT abrasion resistant dots for grip and you have the best lightweight, cut solution on the market. Work harder, work longer with the AX360 Dotted Grip Cut 3. 

FEATURES

  • New lightweight cut 3 protection
  • Foam nitrile base for enhanced grip
  • NFT dotted palm for abrasion resistance
  • Elastic wrist to keep dirt and debris out
  • EN388 4344BX
  • ANSI cut level 2

Toughness

7

Comfortability

8

Feel

8

Breathability

9